-
IEEE Trans Biomed Eng · Jun 1997
Design of a recognition system to predict movement during anesthesia.
- A Sharma and R J Roy.
- Becton Dickinson and Company, Franklin Lakes, NJ 07417, USA.
- IEEE Trans Biomed Eng. 1997 Jun 1; 44 (6): 505-11.
AbstractThe need for a reliable method of predicting movement during anesthesia has existed since the introduction of anesthesia. This paper proposes a recognition system, based on the autoregressive (AR) modeling and neural network analysis of the electroencephalograph (EEG) signals, to predict movement following surgical stimulation. The input to the neural network will be the AR parameters, the hemodynamic parameters blood pressure (BP) and heart rate (HR), and the anesthetic concentration in terms of the minimum alveolar concentration (MAC). The output will be the prediction of movement. Design of the system and results from the preliminary tests on dogs are presented in this paper. The experiments were carried out on 13 dogs at different levels of halothane. Movement prediction was tested by monitoring the response to tail clamping, which is considered to be a supramaximal stimulus in dogs. The EEG data obtained prior to tail clamping was processed using a tenth-order AR model and the parameters obtained were used as input to a three-layer perceptron feedforward neural network. Using only AR parameters the network was able to correctly classify subsequent movement in 85% of the cases as compared to 65% when only hemodynamic parameters were used as the input to the network. When both the measures were combined, the recognition rate rose to greater than 92%. When the anesthetic concentration was added as an input the network could be considerably simplified without sacrificing classification accuracy. This recognition system shows the feasibility of using the EEG signals for movement during anesthesia.
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.