• IEEE Trans Med Imaging · Mar 2011

    Rigid body motion compensation for spiral projection imaging.

    • Kenneth O Johnson, Ryan K Robison, and James G Pipe.
    • Keller Center for Imaging Innvation, Barrow Neurological Institute, Phoenix, AZ 85013, USA.
    • IEEE Trans Med Imaging. 2011 Mar 1; 30 (3): 655-65.

    AbstractSpiral projection imaging (SPI) is a 3D, spiral based magnetic resonance imaging (MRI) acquisition scheme that allows for self-navigated motion estimation of all six degrees-of-freedom. The trajectory, a set of spiral planes, is enhanced to accommodate motion tracking by adding orthogonal planes. Rigid-body motion tracking is accomplished by comparing the overlapping data and deducing the motion that is consistent with the comparisons. The accuracy of the proposed method is quantified for simulated data and for data collected using both a phantom and a volunteer. These tests were repeated to measure the effect of off-resonance blurring, coil sensitivity, gradient warping, undersampling, and nonrigid motion (e.g., neck). The artifacts of off-resonance, coils sensitivity, and gradient warping impose an unnotable effect on the accuracy of motion estimation. The worst mean accuracy is 0.15° and 0.20 mm for the phantom while the worst mean accuracy is 0.48° and 0.34 mm when imaging a brain, indicating that the nonrigid component in human subjects slightly degrades accuracy. When applied to in vivo motion, the proposed technique considerably reduces motion artifact.

      Pubmed     Full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…