• Nadine Ott, Michael Hackl, Andreas Prescher, Martin Scaal, Fabian Lanzerath, Lars Peter Müller, and Kilian Wegmann.
• Department of Orthopedic and Trauma Surgery, Faculty of Medicine and University Hospital of Cologne, University of Cologne, Kerpener Street 62, 50937, Cologne, Germany. Nadine.Ott@uk-koeln.de.
• Arch Orthop Trauma Surg. 2023 May 1; 143 (5): 248524912485-2491.

BackgroundComplex proximal humeral fracture ranks among the most common fracture types, especially in elderly patients. In locked plate fixation of proximal humerus fractures, the calcar is deciding for screws providing further medial column support. To date, the biomechanical effect of the length of these calcar screws is not well known. The purpose of this study was to analyze the effect of long calcar screws on fresh frozen prefractured cadaveric specimens.MethodsIn the present biomechanical study, 8 pairs of cadaveric proximal humeri were fractured identically using a custom-made fracture simulator. ORIF was performed using a locking plate (PHILOS; Fa. Synthes). The specimens were tested in a biomechanical setup under increased axial load without any calcar screws installed, with short calcar screws and long calcar screws installed. Strain gages (4-wire-120 Ohm, Fa. Vishay) mounted on the locking plate were used to evaluate the fixation strain and to give an estimate for primary stability..ResultsThe measured strain of the locking plate without calcar screws (804,64 µm/m) at maximum load (200 N) was significantly higher than with short (619,07 µm/m; p = 0.02) or long calcar screws (527,31 µm/m; p = 0.007). Additionally, strain with short calcar screws was noticeably higher in comparison to long calcar screws (619,07 µm/m vs. 527,31 µm/m; p = 0.03).ConclusionUse of calcar screws improves the stability of realistically impacted 3-part varus humeral fractures. Long calcar screws that are positioned as close as possible to the joint provide further primary stability compared to short calcar screws.Level Of EvidenceBasic science study.© 2022. The Author(s).

17 keywords...

hide…