• Med Biol Eng Comput · Jun 2013

    Development and validation of a pressure-type automated quantitative sensory testing system for point-of-care pain assessment.

    • Steven E Harte, Mainak Mitra, Eric A Ichesco, Megan E Halvorson, Daniel J Clauw, Albert J Shih, and Grant H Kruger.
    • Department of Anesthesiology, Chronic Pain and Fatigue Research Center, University of Michigan Medical School, Ann Arbor, MI 48106, USA.
    • Med Biol Eng Comput. 2013 Jun 1;51(6):633-44.

    AbstractQuantitative sensory testing (QST) can provide useful information about the underlying mechanisms involved in chronic pain. However, currently available devices typically employed suffer from operator-dependent effects, or are too cumbersome for routine clinical care. This paper presents the design and initial validation of a novel automated pressure-pain type QST platform, termed the multi-modal automated sensory testing (MAST) system. The MAST configuration presented consists of wireless, hand-held thumbnail pressure stimulators (with circular 10 mm² rubber tips) and graphical touch screen interface devices to manage the QST process and obtain patient feedback. Validation testing of the custom-designed force sensor showed a 1 % error for low forces increasing to 2 % error for larger loads up to 100 N (full-scale). Validation of the controller using three ramp rates (64, 248, and 496 kPa/s) and six pressures (32, 62, 124, 273, 620, and 1116 kPa) showed an overall mean error of 1.7 % for applied stimuli. Clinical evaluation revealed decreased pressure pain thresholds in chronic pain patients (98.07 ± SE 16.34 kPa) compared to pain free, healthy control subjects (259.88 ± SE 33.54 kPa, p = 0.001). The MAST system is portable and produces accurate, repeatable stimulation profiles indicating potential for point-of-care applications.

      Pubmed     Full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…