-
Physiological measurement · Jun 2005
Compliance and resistance levels and unloading in proportional assist ventilation.
- Jaana A Leipälä, Shiho Iwasaki, Silke Lee, Anthony D Milner, and Anne Greenough.
- Children Nationwide Regional Neonatal Intensive Care Centre, King's College Hospital, London SE5 9RS, UK.
- Physiol Meas. 2005 Jun 1;26(3):281-92.
AbstractDuring proportional assist ventilation (PAV), resistive and elastic unloading relieve the work of breathing. Excessive unloading, however, results in resonant oscillations and runaway pressures. Our aim was to determine the appropriate levels of unloading that could be applied to clinical practice. A lung model, resistance (50 or 150 cmH(2)O l(-1) s(-1)) and compliance (0.4 or 0.8 ml/cmH(2)O), was used. The volumes and airway pressures delivered by the ventilator at varying levels of resistive and elastic unloading and simulated breaths were recorded. Oscillations in airway pressure only occurred when the level of resistive unloading exceeded the model's resistance. When the level of unloading fully compensated for the model's compliance, peak inflating pressures greater than 40 cmH(2)O were delivered; peak pressure limits of 20 cmH(2)O, however, resulted in very short (0.2 s or less) inflation times. High peak pressures were not delivered if the level of elastic unloading used was limited to that which reduced the model's elastance to that of a 'normal lung'. In conclusion, these results suggest that when using PAV, it is important to assess the compliance and resistance of the infant and endotracheal tube, so that levels of unloading that fully compensate for the resistance and compliance levels can be avoided.
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.