• K Nakajima, T Tamura, and H Miike.
• Department of Electrical and Electronic Engineering, Yamaguchi University, Japan.
• Med Eng Phys. 1996 Jul 1; 18 (5): 365-72.

AbstractAn apparatus for simultaneously monitoring heart and respiratory rates was developed using photoplethysmography (PPG) and digital filters, and compared with conventional methods. The PPG signal, which includes both heart and respiratory components, was measured at the earlobe with an original transmission mode photoplethysmographic device. A digital filtering technique was used to distinguish heart and respiratory signals from the PPG signal. The cut-off frequency of the respiratory signal filter was selected automatically depending on the heart rate. Using digital filtering techniques, heart and respiratory signals were separated at rest and during exercise. The digital signal processor was employed to realize an adaptive and real-time filtering. The heart rate was calculated by the zero-crossing method and the respiratory rate from the peak interval of the filtered signal. To evaluate the newly developed monitor, an ECG for heart rate and a transthoracic impedance plethysmogram for respiratory rate were monitored simultaneously. To obtain higher heart and respiratory rates, exercise was performed on an electrical bicycle ergometer. Heart and respiratory rates calculated by the new method compare to those obtained from ECG and the transthoracic impedance plethysmogram. The maximum error of heart and respiratory rates was 10 beats/min and 7 breaths/min, respectively.

19 keywords...

hide…