-
Med Biol Eng Comput · Jul 1997
Optical assessment of recovery of tissue blood supply after removal of externally applied pressure.
- A Murray and D Marjanovic.
- Regional Medical Physics Department, Freeman Hospital, Newcastle upon Tyne, UK.
- Med Biol Eng Comput. 1997 Jul 1; 35 (4): 425-7.
AbstractThe authors use photoelectric plethysmography to determine the external occlusion pressure for blood vessels in human tissue in vivo. Three wavelengths are employed; 950 nm (infra-red), 640 nm (red) and 583 nm (yellow). Each probe is applied in turn to one finger of each subject. Pressure is applied, using a neonatal blood pressure cuff, to the finger via the probe. This pressure is increased linearly to 20 kPa (150 mmHg) over 15 s and then decreased linearly to zero over 15 s. The pressure at which perfusion returns is obtained for four repeat measurements at each wavelength. The mean (+/-standard deviation) occlusion pressures for all 13 subjects investigated are 7.1 (+/-1.9) kPa for infra-red, 6.3 (+/-1.7) kPa for red and 5.8 (+/-1.8) kPa for yellow. The pressure is 0.79 (+/-0.83) kPa lower for red compared with infra-red (P < 0.01), 0.54 (+/-0.60) kPa lower for yellow compared with red (P < 0.002) and 1.3 (+/-1.0) kPa lower for yellow compared with infra-red (P < 0.005). The reduced penetration of shorter optical wavelengths can be used to detect the lower occlusion pressures of the smaller blood vessels nearer the skin surface.
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.