• Keisuke Tomita, Taka-Aki Nakada, Taku Oshima, Takehiko Oami, Tuerxun Aizimu, and Shigeto Oda.
• Department of Emergency and Critical Care Medicine, Chiba University Graduate School of Medicine, 1-8-1 Inohana, Chuo, Chiba, 260-8677, Japan.
• J Clin Monit Comput. 2019 Aug 1; 33 (4): 637-645.

AbstractWe evaluated the accuracy and precision of a novel non-invasive monitoring device in comparison with conventional monitoring methods used in intensive care units (ICU). The study device was developed to measure blood pressure, pulse rate, respiratory rate, and oxygen saturation, continuously with a single sensor using the photoplethysmographic technique. Patients who were monitored with arterial pressure lines in the ICU were enrolled. Systolic and diastolic blood pressure, pulse rate, respiratory rate, and arterial oxygen saturation were measured continuously for 30 min at 5-min intervals using the conventional methods and the study device. The primary outcome variable was blood pressure. Blood pressure measured by the study device highly correlated with the arterial pressure line values (correlation coefficients > 0.95). Percent errors for systolic, diastolic and mean blood pressures were 2.4% and 6.7% and 6.5%, respectively. Percent errors for pulse rate, respiratory rate and oxygen saturation were 3.4%, 5.6% and 1.4%, respectively. The non-invasive, continuous, multi-parameter monitoring device presented high level of agreement with the invasive arterial blood pressure monitoring, along with sufficient accuracy and precision in the measurements of pulse rate, respiratory rate, and oxygen saturation.

28 keywords...

hide…