• Conf Proc IEEE Eng Med Biol Soc · Jan 2013

    An algorithm to improve the estimation accuracy of a non-invasive method for cardiac output measurement based on prolonged expiration.

    • E Schena, S Cecchini, P Saccomandi, M Leuzzi, and S Silvestri.
    • Conf Proc IEEE Eng Med Biol Soc. 2013 Jan 1; 2013: 1823-6.

    AbstractCardiac output (CO) monitoring is important in the hemodynamic management of critically ill patients. In a previous study, a novel non-invasive technique for CO monitoring based on prolonged expiration was proposed. The novel method showed good agreement with thermodilution on stable mechanically ventilated patients; unstable patients were excluded. The aim of this study is to improve the outcome of the above mentioned method on hemodynamic unstable patients, requiring vasoactive medications, and showing marked cardiogenic oscillations on waveforms related to expired gases. This prospective study has been carried out on three cardiac surgery patients; eighteen CO measurements were performed on each patient, and these values were compared with data obtained by thermodilution. The designed and tested algorithm allowed to reach a good agreement between CO measured by our method and by thermodilution (e.g., the mean percentage differences were 4%, 11% and 3%). Even though further validation is necessary, the results are quite promising and the adopted solution appears to allow the suitability of the prolonged expiration method also on unstable patients.

      Pubmed     Full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…