• B C Su, Y F Tsai, C Y Chen, H P Yu, M W Yang, W C Lee, and C C Lin.
• Department of Anesthesia, Chang Gung Memorial Hospital-Linkou, and College of Medicine, Chang Gung University, Kwei-Shan Taoyuan, Taiwan.
• Transplant. Proc. 2012 Mar 1;44(2):424-8.

BackgroundHemodynamic monitoring is essential to a successful liver transplantation procedure. FloTrac, a hemodynamic monitor that uses arterial-waveform-based pulse contour analysis for cardiac output (CO) measurement, has proven useful in many clinical settings. One of the primary foci of FloTrac's recent third-generation software upgrade was improving its accuracy in low systemic vascular resistance status. We evaluated the accuracy of the upgraded FloTrac monitor during liver transplantation.Materials And MethodsTwenty-eight patients undergoing liver transplantation were enrolled in the study. Two sets of CO were measured with a radial arterial line connected to a FloTrac monitor (COFT) and a pulmonary artery catheter connected to a continuous cardiac output Vigilence monitor (COPAC). Simultaneous CO measurement was performed and recorded every 5 minutes throughout the surgery. Bland-Altman analysis was used to estimate the accuracy. The comparative method and reference method were considered interchangeable if the limits of agreement did not exceed a threshold set a priori at the greater of ±1 L/min, or a percentage error of lesser than 30%.ResultsIn all, 3234 paired data were collected. The bias was -0.8 L/min and the limits of agreements were -5.6 to 4.0 L/min. Percentage error was 75%. Regression analysis of the systemic vascular resistance index (SVRI) and the bias between COPAC and COFT showed that the bias was inversely related to the SVRI [r2=0.49; P<.001, y=-32.1983+9.9978 Log(x)].ConclusionsDespite a software upgrade, the effectiveness of the FloTrac artery-derived cardiac output monitor for CO measurement during liver transplantation remains limited.Copyright © 2012 Elsevier Inc. All rights reserved.

28 keywords...

hide…