-
J. Neurosci. Methods · Apr 2000
Clinical TrialChronaxie calculated from current-duration and voltage-duration data.
- J Holsheimer, E A Dijkstra, H Demeulemeester, and B Nuttin.
- Department of Electrical Engineering, Institute for Biomedical Technology, University of Twente, PO Box 217, NL-7500 AE, Enschede, The Netherlands. j.holsheimer@el.utwente.nl
- J. Neurosci. Methods. 2000 Apr 1;97(1):45-50.
AbstractTo determine the rheobase and the chronaxie of excitable cells from strength-duration curves both constant-current pulses and constant-voltage pulses are applied. Since the complex impedance of the electrode-tissue interface varies with both the pulsewidth and the stimulation voltage, chronaxie values estimated from voltage-duration measurements will differ from the proper values as determined from current-duration measurements. To allow a comparison of chronaxie values obtained by the two stimulation methods, voltage-duration curves were measured in human subjects with a deep brain stimulation electrode implanted, while the current and the load impedance of the stimulation circuit were determined in vitro as a function of both stimulation voltage and pulsewidth. Chronaxie values calculated from voltage-duration data were shown to be 30-40% below those estimated from current-duration data. It was also shown that in the normal range of stimulation amplitudes (up to 7 V) the load impedance increases almost linearly with the pulsewidth. This result led us to present a simple method to convert voltage-duration data into current-duration data, thereby reducing the error in the calculated chronaxie values to approximately 6%. For this purpose voltage-duration data have to be measured for pulses up to 10-20 times the expected chronaxie.
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.