-
- K Ali and J G Brock-Utne.
- Department of Anesthesia, Stanford University School of Medicine, CA 94305.
- J Clin Anesth. 1992 Nov 1; 4 (6): 468-71.
Study ObjectivePerformance evaluation of a draw-over vaporizer with a nonrebreathing circuit during simulated adverse conditions.DesignOpen laboratory study.SettingUniversity hospital laboratory.Materials And InterventionsThe output (%) of a temperature-compensated Ohmeda Cyprane PAC (portable anesthesia complete) draw-over vaporizer (Ohmeda, Madison, WI) using isoflurane attached to a nonrebreathing circuit was tested in the laboratory during manual ventilation under normal and simulated adverse conditions. The adverse conditions tested were high ambient temperature and static and dynamic positional variation.Measurements And Main ResultsThe results show that the output bias of the PAC vaporizer has a generally consistent profile as tested, except when placed in the 180 degrees full-inversion or 90 degrees anterior-tilt position. We also conducted trials with the Penlon ventilator (Ohmeda, Abingdon, Oxford, U.K.) attached to the circuit at each of its input ports. Ventilation at one input port produced dangerously high airway pressures (within the circuit), thus supporting the manufacturer's recommendation against the use of this port for positive-pressure ventilation. Using the recommended port, the test lung was seen to inflate and deflate appropriately, but, surprisingly, no vapor output was detected by the agent monitor at any vaporizer setting when using the ventilator at the recommended port.ConclusionAnesthetists should be aware of the pitfalls and possible problems that may be associated with this type of anesthetic delivery system.
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.